3M™ UHMW Polyethylene Tapes are film coated with a rubber adhesive which
provides an excellent abrasion resistant surface. These tapes feature a unique
combination of properties that make it ideal for many tough impact wear or sliding
applications. 3M™ UHMW-PE Film Tape 5421 is a thinner version of 3M™ UHMWPE Film Tape 5423
Features :
- Tape demonstrated no evidence of wear through after Taber Abrasion at 1000
cycles, using CS-10 wheel and 1000g load when applied to S-37 mounting sheet.
- Low water vapor transmission rate <0.50 g/100in.2
/24hrs.
- Thick caliper UHMW polyethylene tape for extended service life as a protective
surface against tough impact wear or sliding applications.
- Outstanding abrasion resistance so will outwear PTFE and other materials in
sliding applications.
- Low coefficient of friction characteristics is exceeded only by PTFE.
- UHMW-PE tape can be used where lubrication is not possible because of
contamination.
- Rubber Adhesive provides good initial tack for immediate bonding to material
surface.
- Liner makes it ideal for fabricating or die-cutting into various lengths and shapes.
Application Ideas :
Noise reduction between dissimilar parts.
- Reduce squeaks, rattles and other noises that occur with movement
- Lining of conveyer guide rails, tank and bin liners, and discharge chutes.
- Protection for aluminum sheets on stretch forming presses.
- Liners for Spray booths.
- Slick surface for easy glide for drawers and cabinets.
