LOCTITE® SF 7414™ is a fast drying paste to be used in
production to visually detect any movement in the adjustment
of parts. LOCTITE® SF 7414™ has been developed for use on
compression fittings, studs, nuts, parts and assemblies after
they have been set to proper tension or position. Service
personnel or inspectors can quickly spot any changes or
tampering with equipment. It has excellent adhesion to metals,
including aluminum, magnesium, titanium, stainless steel and
copper, and is non-corrosive to these metals. This product
should be typically applied in temperatures from 15 to 25 °C,
higher temperatures will reduce the drying time. Operating
temperatures range from -35 to +145 °C
Storage
The product is classified as flammable and must be stored in
an appropriate manner in compliance with relevant
regulations. Do not store near oxidizing agents or combustible
materials. Store product in the unopened container in a dry
location. Storage information may also be indicated on the
product container labelling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
cannot assume responsibility for product which has been
contaminated or stored under conditions other than those
previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representive.
