LOCTITE® DOUBLE BUBBLE™ will bond to a wide variety of
materials (wood, metal, plastic, ceramic) and cures rapidly to
give handling strength in approximately 5 minutes. Packed into
a handy sachet and supplied complete with a mixing stick and
pallet, this product is suitable for the rapid assembly of small
components or for fast and effective repair work.
Directions for use:
1. Bond areas should be clean and free from grease. Clean
all surfaces with a Loctite®
cleaning solvent and allow to
dry.
2. For maximum strength, surface abrasion is
recommended. A fine to medium grit emery cloth or
sandpaper is best. Wash after abrading.
3. Pour resin and hardener from pouches onto the provided
mixing palette.
4. Mix resin and hardener on palette with mixing stick until
the product has a uniform color. The adhesive is
packaged in a pre-measured kit. This ensures consistent
performance since resin and hardener are always
properly measured.
5. For maximum bond strength, apply adhesive evenly to
both surfaces to be joined.
6. Application to the substrates should be made within 3
minutes. Larger quantities and/or higher temperatures
will reduce this working time.
7. Join the adhesive coated surfaces and allow to cure.
Higher temperatures will speed up curing.
8. Keep assembled parts from moving during cure. The bond
should be allowed to develop full strength before
subjecting to any service load.
9. Excessive uncured adhesive can be cleaned up with
ketone type solvents.
