One part 250°F (121°C) curing 100% solids, 3M™ Scotch-Weld™ Epoxy Adhesive 2214 is a paste
consistency epoxy adhesive designed for bonding metals and many high temperature plastics such as
berglass reinforced plastic, polyester, and phenolics.
3M™ Scotch-Weld™ Adhesive 2214 Hi-Temp New Formula is an aluminum lled, deaerated product for use
where higher strengths are required between 180°F to 350°F (82°C to 177°C).
Directions for use:
1. Warm products to room temperature before opening containers to restore proper application consistency and to prevent moisture condensation on adhesive surface.
Containers may be stored at room temperature for 1-2 days to thaw. Do not warm at temperatures above 80°F (27°C).
2. For high strength structural bonds, paint, oxide lms, oils, dust, mold release agents and all other surface contaminants must be completely removed. However, the
amount of surface preparation directly depends on the substrates, the required bond strength, environmental aging resistance, and requirements determined by the
user in light of the user’s particular purpose and method of application. For specic surface preparations on common substrates, see the section on surface preparation.
3. Use gloves to minimize skin contact and do not use solvents for cleaning hands.
4. For maximum bond strength, apply product evenly to both surfaces to be joined.
5. Join the adhesive coated surfaces and heat cure using the appropriate bondline temperature and time for the specic product being used.
6. Keep parts from moving during cure as contact pressure is necessary.
7. Cleanup can be accomplished with solvent such as 3M™ Scotch-Grip™ Solvent No. 3 or Methyl Ethyl Ketone.
