LOCTITE® AA 330™ is a general purpose adhesive that is
used to bond metal, wood, ferrite, ceramic and plastic
materials. Applications include tool handles, appliances,
sporting goods and decorative trim.
Directions for use:
- For best performance bond surfaces should be clean and
free from grease.
- To ensure a fast and reliable cure, Activator 7387™ or
7386™ should be applied to one of the bond surfaces and
the adhesive to the other surface. Parts should be
assembled within 15 minutes.
- The recommended bondline gap is 0.1 mm. Where bond
gaps are large (up to a maximum of 0.5 mm), or faster
cure speed is required, Activator 7387™ or 7386™ should
be applied to both surfaces. Parts should be assembled
immediately (within 1 minute).
- Excess adhesive can be wiped away with organic solvent.
- Bond should be held clamped until adhesive has fixtured.
- Product should be allowed to develop full strength before
subjecting to any service loads (typically 24 to 72 hours
after assembly, depending on bond gap, materials and
ambient conditions).
Storage:
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
