- Extremely effective on chemical resistant epoxy and polyurethane paint schemes
- Suitable for use on all conventional metal and alloys used in aircraft construction
- Superior evaporation retardants increase drying time, therefore prolonging stripping activity
- Ease of rinsing in order to leave a wax free substrate ready for paint
DASIC D23V has been formulated to give highest possible efficiency in the removal of the chemical resistant
epoxy and polyurethane paint schemes used on aircraft, whilst being suitable for use on all conventional
metals and alloys used in aircraft construction.
DASIC D23V is a higher viscosity material intended for both brush and high pressure applications.
Increased drying times and, therefore, prolonged stripping activity has been obtained by incorporating highly
effective evaporation retardants into the formulation. Ease of rinsing in order to leave a wax free substrate
ready to paint with a minimum of preparation is an additional feature of the product and has been achieved
by incorporating superior emulsifying agents into the formulation.
DASIC D23V will degrade the majority of rubber and plastic materials and areas containing these should be
masked off before using the product.
Applications :
a) Spray/Flow Coating Application :
DASIC D23V should be applied using a DASIC D23 Pump Unit. (See separate product data sheet). This
unit allows the product to be applied to the surface as a thick even coating without atomizing the material
b) Brush Application :
DASIC D23V should be applied to the substrate as a thick even coating. This effect can be most easily
obtained by stippling the product onto the surface rather than using a conventional brushing action.
