73XNW is used in leading aircraft and space manufacturers for general marking. In space applications, the outgassing chracateristics are extremely low
Method of Application:
73X should be applied with a rubber stamp and stamp pad to almost any absorbent or non-absorbent surfaces. For best results, a cloth or linen type stamp pad is recommended. When applying the ink to the pad, saturate it thoroughly. Work it into the pores of the pad using any flat bladed instrument (spatula or ice cream stick) as a spreader. Blot out excess if necessary. During use, if gumming or caking on pad occurs, application of the 73X Re-conditioner solvent is recommended
Drying time:
Room temperature, humidity and ink film thickness all may cause a great difference in drying rate/time. On the average however, the ink when applied with a rubber stamp and pad, will dry to the touch in approximate 6 minutes. The Drying and full Curing period for the 73X Series is 24 hours.
